838 lines
19 KiB
C
838 lines
19 KiB
C
|
/********************************** (C) COPYRIGHT *******************************
|
||
|
|
* File Name : CH390.c
|
||
|
|
* Author : WCH
|
||
|
|
* Version : V1.0
|
||
|
|
* Date : 2023/05/30
|
||
|
|
* Description : CH390 Ethernet controller source file
|
||
|
|
*******************************************************************************/
|
||
|
|
#include "CH390.h"
|
||
|
|
|
||
|
|
ch390_interface_t ch390_if;
|
||
|
|
|
||
|
|
void ch390_interface_register(ch390_interface_t interface)
|
||
|
|
{
|
||
|
|
ch390_if = interface;
|
||
|
|
}
|
||
|
|
|
||
|
|
#ifdef CH390_INTERFACE_SPI
|
||
|
|
#define ch390_spi_dummy_read() ch390_if.spi_exc_data(0)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_read_reg
|
||
|
|
* @brief Read register
|
||
|
|
* @param reg - Target register address
|
||
|
|
* @return Register value
|
||
|
|
*/
|
||
|
|
uint8_t ch390_read_reg(uint8_t reg)
|
||
|
|
{
|
||
|
|
uint8_t spi_data;
|
||
|
|
ch390_if.scs(0); // CS = 0
|
||
|
|
ch390_if.spi_exc_data(reg | OPC_REG_R);
|
||
|
|
spi_data = ch390_spi_dummy_read();
|
||
|
|
ch390_if.scs(1); // CS = 1
|
||
|
|
return spi_data;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_write_reg
|
||
|
|
* @brief Write register
|
||
|
|
* @param reg - Target register address
|
||
|
|
* @param value - Value to be written
|
||
|
|
*/
|
||
|
|
void ch390_write_reg(uint8_t reg, uint8_t value)
|
||
|
|
{
|
||
|
|
ch390_if.scs(0); // CS = 0
|
||
|
|
ch390_if.spi_exc_data(reg | OPC_REG_W);
|
||
|
|
ch390_if.spi_exc_data(value);
|
||
|
|
ch390_if.scs(1); // CS = 1
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
/**
|
||
|
|
* @name ch390_read_mem
|
||
|
|
* @brief Read data from RX SRAM
|
||
|
|
* @param data - Data buffer
|
||
|
|
* @param length - Length to read
|
||
|
|
*/
|
||
|
|
void ch390_read_mem(uint8_t *data, int length)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
ch390_if.scs(0);
|
||
|
|
ch390_if.spi_exc_data(OPC_MEM_READ);
|
||
|
|
|
||
|
|
for(i = 0; i < length; i++) {
|
||
|
|
data[i] = ch390_spi_dummy_read();
|
||
|
|
}
|
||
|
|
ch390_if.scs(1);
|
||
|
|
}
|
||
|
|
/**
|
||
|
|
* @name ch390_write_mem
|
||
|
|
* @brief Write data to TX SRAM
|
||
|
|
* @param data - Data buffer
|
||
|
|
* @param length - Length to write
|
||
|
|
*/
|
||
|
|
void ch390_write_mem(uint8_t *data, int length)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
ch390_if.scs(0);
|
||
|
|
ch390_if.spi_exc_data(OPC_MEM_WRITE);
|
||
|
|
for(i = 0; i < length; i++) {
|
||
|
|
ch390_if.spi_exc_data(data[i]);
|
||
|
|
}
|
||
|
|
ch390_if.scs(1);
|
||
|
|
}
|
||
|
|
#else
|
||
|
|
/**
|
||
|
|
* @name ch390_read_reg
|
||
|
|
* @brief Read register
|
||
|
|
* @param reg - Target register address
|
||
|
|
* @return Register value
|
||
|
|
*/
|
||
|
|
uint8_t ch390_read_reg(uint8_t reg)
|
||
|
|
{
|
||
|
|
uint8_t data;
|
||
|
|
// Set index
|
||
|
|
ch390_if.cs(0);
|
||
|
|
ch390_if.cmd(0);
|
||
|
|
ch390_if.wrb(0);
|
||
|
|
ch390_if.ll_write(reg);
|
||
|
|
ch390_if.wrb(1);
|
||
|
|
ch390_if.cmd(1);
|
||
|
|
|
||
|
|
// Read data
|
||
|
|
ch390_if.ll_ioinput();
|
||
|
|
ch390_if.rdb(0);
|
||
|
|
data = (uint8_t)(ch390_if.ll_read());
|
||
|
|
ch390_if.rdb(1);
|
||
|
|
ch390_if.cs(1);
|
||
|
|
return data;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_write_reg
|
||
|
|
* @brief Write register
|
||
|
|
* @param reg - Target register address
|
||
|
|
* @param value - Value to be written
|
||
|
|
*/
|
||
|
|
void ch390_write_reg(uint8_t reg, uint8_t value)
|
||
|
|
{
|
||
|
|
// Set index
|
||
|
|
ch390_if.cs(0);
|
||
|
|
ch390_if.cmd(0);
|
||
|
|
ch390_if.wrb(0);
|
||
|
|
ch390_if.ll_write(reg);
|
||
|
|
ch390_if.wrb(1);
|
||
|
|
ch390_if.cmd(1);
|
||
|
|
|
||
|
|
// Write data
|
||
|
|
ch390_if.wrb(0);
|
||
|
|
ch390_if.ll_write(value);
|
||
|
|
ch390_if.wrb(1);
|
||
|
|
ch390_if.cs(1);
|
||
|
|
}
|
||
|
|
|
||
|
|
void set_index(uint16_t reg)
|
||
|
|
{
|
||
|
|
ch390_if.cs(0);
|
||
|
|
ch390_if.cmd(0);
|
||
|
|
ch390_if.wrb(0);
|
||
|
|
ch390_if.ll_write(reg);
|
||
|
|
ch390_if.wrb(1);
|
||
|
|
ch390_if.cmd(1);
|
||
|
|
ch390_if.cs(1);
|
||
|
|
}
|
||
|
|
|
||
|
|
#ifdef CH390_INTERFACE_8_BIT
|
||
|
|
/**
|
||
|
|
* @name ch390_read_mem
|
||
|
|
* @brief Read data from RX SRAM
|
||
|
|
* @param data - Data buffer
|
||
|
|
* @param length - Length to read
|
||
|
|
*/
|
||
|
|
void ch390_read_mem(uint8_t *data, int length)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
set_index(CH390_MRCMD);
|
||
|
|
ch390_if.ll_ioinput();
|
||
|
|
ch390_if.cs(0);
|
||
|
|
for(i = 0; i < length; i++) {
|
||
|
|
ch390_if.rdb(0);
|
||
|
|
data[i] = ch390_if.ll_read();
|
||
|
|
ch390_if.rdb(1);
|
||
|
|
}
|
||
|
|
ch390_if.cs(1);
|
||
|
|
}
|
||
|
|
/**
|
||
|
|
* @name ch390_write_mem
|
||
|
|
* @brief Write data to TX SRAM
|
||
|
|
* @param data - Data buffer
|
||
|
|
* @param length - Length to write
|
||
|
|
*/
|
||
|
|
void ch390_write_mem(uint8_t *data, int length)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
set_index(CH390_MWCMD);
|
||
|
|
ch390_if.cs(0);
|
||
|
|
for(i = 0; i < length; i++) {
|
||
|
|
ch390_if.wrb(0);
|
||
|
|
ch390_if.ll_write(data[i]);
|
||
|
|
ch390_if.wrb(1);
|
||
|
|
}
|
||
|
|
ch390_if.cs(1);
|
||
|
|
}
|
||
|
|
#endif // CH390_INTERFACE_8_BIT
|
||
|
|
#ifdef CH390_INTERFACE_16_BIT
|
||
|
|
void ch390_read_mem(uint8_t *data, int length)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
uint16_t *data_w = (uint16_t *)data;
|
||
|
|
length = (length + 1) / 2;
|
||
|
|
|
||
|
|
set_index(CH390_MRCMD);
|
||
|
|
ch390_if.ll_ioinput();
|
||
|
|
ch390_if.cs(0);
|
||
|
|
for(i = 0; i < length; i++) {
|
||
|
|
ch390_if.rdb(0);
|
||
|
|
data_w[i] = ch390_if.ll_read();
|
||
|
|
ch390_if.rdb(1);
|
||
|
|
}
|
||
|
|
ch390_if.cs(1);
|
||
|
|
}
|
||
|
|
void ch390_write_mem(uint8_t *data, int length)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
uint16_t *data_w = (uint16_t *)data;
|
||
|
|
length = (length + 1) / 2;
|
||
|
|
|
||
|
|
set_index(CH390_MWCMD);
|
||
|
|
ch390_if.cs(0);
|
||
|
|
for(i = 0; i < length; i++) {
|
||
|
|
ch390_if.wrb(0);
|
||
|
|
ch390_if.ll_write(data_w[i]);
|
||
|
|
ch390_if.wrb(1);
|
||
|
|
}
|
||
|
|
ch390_if.cs(1);
|
||
|
|
}
|
||
|
|
#endif // CH390_INTERFACE_16_BIT
|
||
|
|
#endif // CH390_INTERFACE_SPI
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_receive_packet
|
||
|
|
* @brief Receive packet
|
||
|
|
* @param buff - Size equal to CH390_PKT_MAX
|
||
|
|
* @param rx_status - Output abnormal status while receiving packet.
|
||
|
|
* It has the same meaning as RSR(06h).
|
||
|
|
* @return Packet length
|
||
|
|
*/
|
||
|
|
uint32_t ch390_receive_packet(uint8_t *buff, uint8_t *rx_status)
|
||
|
|
{
|
||
|
|
uint8_t rx_ready;
|
||
|
|
uint16_t rx_len = 0;
|
||
|
|
uint8_t ReceiveData[4];
|
||
|
|
|
||
|
|
// Check packet ready or not
|
||
|
|
ch390_read_reg(CH390_MRCMDX);
|
||
|
|
rx_ready = ch390_read_reg(CH390_MRCMDX);
|
||
|
|
|
||
|
|
// if rxbyte != 1 or 0 reset device
|
||
|
|
if (rx_ready & CH390_PKT_ERR)
|
||
|
|
{
|
||
|
|
// Reset RX FIFO pointer
|
||
|
|
ch390_write_reg(CH390_RCR, 0); //RX disable
|
||
|
|
ch390_write_reg(CH390_MPTRCR, 0x01); //Reset RX FIFO pointer
|
||
|
|
ch390_write_reg(CH390_MRRH, 0x0c);
|
||
|
|
ch390_if.delay_us(1000);
|
||
|
|
ch390_write_reg(CH390_RCR, RCR_RXEN); //RX Enable
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
if (!(rx_ready & CH390_PKT_RDY))
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
ch390_read_mem(ReceiveData, 4);
|
||
|
|
|
||
|
|
*rx_status = ReceiveData[1];
|
||
|
|
rx_len = ReceiveData[2] | (ReceiveData[3] << 8);
|
||
|
|
|
||
|
|
if(rx_len <= CH390_PKT_MAX)
|
||
|
|
{
|
||
|
|
ch390_read_mem(buff, rx_len);
|
||
|
|
}
|
||
|
|
|
||
|
|
if ((*rx_status & 0x3f) || (rx_len > CH390_PKT_MAX))
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
return rx_len;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_send_packet
|
||
|
|
* @brief Send packet
|
||
|
|
* @param buff - Data to be sent
|
||
|
|
* @param length - Less than 3k bytes.
|
||
|
|
*/
|
||
|
|
void ch390_send_packet(uint8_t *buff, uint16_t length)
|
||
|
|
{
|
||
|
|
// Write data to SRAM
|
||
|
|
ch390_write_mem(buff, length);
|
||
|
|
// Wait until last transmit complete
|
||
|
|
while(ch390_read_reg(CH390_TCR) & TCR_TXREQ);
|
||
|
|
// Set current packet length
|
||
|
|
ch390_write_reg(CH390_TXPLL, length & 0xff);
|
||
|
|
ch390_write_reg(CH390_TXPLH, (length >> 8) & 0xff);
|
||
|
|
// Issue transmit request
|
||
|
|
ch390_send_request();
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_send_request
|
||
|
|
* @brief Issue transmit request
|
||
|
|
*/
|
||
|
|
void ch390_send_request()
|
||
|
|
{
|
||
|
|
uint8_t tcr = ch390_read_reg(CH390_TCR);
|
||
|
|
ch390_write_reg(CH390_TCR, tcr | TCR_TXREQ);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_drop_packet
|
||
|
|
* @brief Drop packet in RX SRAM if don't want to read it. This function
|
||
|
|
* modify the memory data read pointer and skip specified length
|
||
|
|
* @param len - Skip length, length of the current packet.
|
||
|
|
*/
|
||
|
|
void ch390_drop_packet(uint16_t len)
|
||
|
|
{
|
||
|
|
uint16_t mdr = ch390_read_reg(CH390_MRRL) | (ch390_read_reg(CH390_MRRH) << 8);
|
||
|
|
#ifdef CH390_INTERFACE_16_BIT
|
||
|
|
mdr = mdr + (len + 1) / 2 * 2;
|
||
|
|
#else
|
||
|
|
mdr = mdr + len;
|
||
|
|
#endif
|
||
|
|
mdr = mdr < 0x4000 ? mdr : mdr - 0x3400;
|
||
|
|
ch390_write_reg(CH390_MRRL, mdr & 0xff);
|
||
|
|
ch390_write_reg(CH390_MRRH, (mdr >> 8) & 0xff);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_read_phy
|
||
|
|
* @brief Read PHY register
|
||
|
|
* @param reg - PHY register address
|
||
|
|
*/
|
||
|
|
uint16_t ch390_read_phy(uint8_t reg)
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_EPAR, CH390_PHY | reg);
|
||
|
|
// Chose PHY, send read command
|
||
|
|
ch390_write_reg(CH390_EPCR, EPCR_ERPRR | EPCR_EPOS);
|
||
|
|
ch390_if.delay_us(100);
|
||
|
|
// Clear read command
|
||
|
|
ch390_write_reg(CH390_EPCR, 0x00);
|
||
|
|
return (ch390_read_reg(CH390_EPDRH) << 8) |
|
||
|
|
(ch390_read_reg(CH390_EPDRL) & 0xFF);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_write_phy
|
||
|
|
* @brief Write PHY register
|
||
|
|
* @param reg - PHY register address
|
||
|
|
* @param value - Value to be written
|
||
|
|
*/
|
||
|
|
void ch390_write_phy(uint8_t reg, uint16_t value)
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_EPAR, CH390_PHY | reg);
|
||
|
|
ch390_write_reg(CH390_EPDRL, (value & 0xff)); // Low byte
|
||
|
|
ch390_write_reg(CH390_EPDRH, ((value >> 8) & 0xff)); // High byte
|
||
|
|
// Chose PHY, send write command
|
||
|
|
ch390_write_reg(CH390_EPCR, 0x0A);
|
||
|
|
ch390_if.delay_us(100);
|
||
|
|
// Clear write command
|
||
|
|
ch390_write_reg(CH390_EPCR, 0x00);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_write_eeprom
|
||
|
|
* @brief Write EEPROM register
|
||
|
|
* @param reg - EEPROM register address
|
||
|
|
* @param value - Value to be written
|
||
|
|
*/
|
||
|
|
void ch390_write_eeprom(uint8_t reg, uint16_t value)
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_EPAR, reg);
|
||
|
|
ch390_write_reg(CH390_EPDRL, (value & 0xff)); // Low byte
|
||
|
|
ch390_write_reg(CH390_EPDRH, ((value >> 8) & 0xff)); // High byte
|
||
|
|
// Chose EEPROM, send write command
|
||
|
|
ch390_write_reg(CH390_EPCR, EPCR_ERPRW);
|
||
|
|
// Clear write command
|
||
|
|
while(ch390_read_reg(CH390_EPCR) & 0x01);
|
||
|
|
// Clear write command
|
||
|
|
ch390_write_reg(CH390_EPCR, 0x00);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_software_reset
|
||
|
|
* @brief Software reset CH390 by NCR
|
||
|
|
*/
|
||
|
|
void ch390_software_reset()
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_NCR, NCR_RST);
|
||
|
|
ch390_if.delay_us(10);
|
||
|
|
ch390_write_reg(CH390_NCR, 0);
|
||
|
|
ch390_write_reg(CH390_NCR, NCR_RST);
|
||
|
|
ch390_if.delay_us(10);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_hardware_reset
|
||
|
|
* @brief Hardware reset CH390 by pull down RSTB pin
|
||
|
|
*/
|
||
|
|
void ch390_hardware_reset()
|
||
|
|
{
|
||
|
|
ch390_if.rst(0);
|
||
|
|
ch390_if.delay_us(10);
|
||
|
|
ch390_if.rst(1);
|
||
|
|
ch390_if.delay_us(10000);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_default_config
|
||
|
|
* @brief Config CH390 with default options:
|
||
|
|
* LED mode 1;
|
||
|
|
* Enable transmit check sum generation;
|
||
|
|
* Enable RX;
|
||
|
|
* Enable all interrupt and PAR
|
||
|
|
*/
|
||
|
|
void ch390_default_config()
|
||
|
|
{
|
||
|
|
// MAC address
|
||
|
|
// uint8_t mac_addr[6] = { 0x50, 0x54, 0x7B, 0x84, 0x00, 0x73 };
|
||
|
|
// Multicast address hash table
|
||
|
|
uint8_t multicase_addr[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
|
||
|
|
|
||
|
|
ch390_set_phy_mode(CH390_AUTO);
|
||
|
|
// Clear status
|
||
|
|
ch390_write_reg(CH390_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
|
||
|
|
ch390_write_reg(CH390_ISR, 0xFF); // Clear interrupt status
|
||
|
|
ch390_write_reg(CH390_TCR2, 0x80); // LED mode 1
|
||
|
|
ch390_write_reg(CH390_TCSCR, TCSCR_ALL); // Enable check sum generation
|
||
|
|
|
||
|
|
// ch390_set_mac_address(mac_addr);
|
||
|
|
ch390_set_multicast(multicase_addr);
|
||
|
|
|
||
|
|
// Enable all interrupt and PAR
|
||
|
|
ch390_write_reg(CH390_IMR, IMR_ALL);
|
||
|
|
// Enable RX
|
||
|
|
ch390_write_reg(CH390_RCR, RCR_RXEN);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_set_phy_mode
|
||
|
|
* @brief Set PHY mode and enable PHY.
|
||
|
|
* PHY mode: Auto-negotiation, 10M/100M, full-duplex/half-duplex
|
||
|
|
* @param mode - PHY mode
|
||
|
|
*/
|
||
|
|
void ch390_set_phy_mode(enum ch390_phy_mode mode)
|
||
|
|
{
|
||
|
|
uint16_t BMCR_value = 0;
|
||
|
|
uint16_t ANAR_value = 0;
|
||
|
|
switch (mode)
|
||
|
|
{
|
||
|
|
case CH390_10MHD:
|
||
|
|
BMCR_value = 0x1000;
|
||
|
|
ANAR_value = 0x21;
|
||
|
|
break;
|
||
|
|
case CH390_10MFD:
|
||
|
|
BMCR_value = 0x1100;
|
||
|
|
ANAR_value = 0x41;
|
||
|
|
break;
|
||
|
|
case CH390_100MHD:
|
||
|
|
BMCR_value = 0x3000;
|
||
|
|
ANAR_value = 0x81;
|
||
|
|
break;
|
||
|
|
case CH390_100MFD:
|
||
|
|
BMCR_value = 0x3100;
|
||
|
|
ANAR_value = 0x101;
|
||
|
|
break;
|
||
|
|
case CH390_AUTO:
|
||
|
|
BMCR_value = 0x1000;
|
||
|
|
ANAR_value = 0x01E1;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
ch390_write_phy(CH390_PHY_BMCR, BMCR_value);
|
||
|
|
ch390_write_phy(CH390_PHY_ANAR, ANAR_value);
|
||
|
|
ch390_write_reg(CH390_GPR, 0x00); // Enable PHY
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_set_mac_address
|
||
|
|
* @brief Set mac address
|
||
|
|
* @param mac_addr - 6-byte length mac address array
|
||
|
|
*/
|
||
|
|
void ch390_set_mac_address(uint8_t *mac_addr)
|
||
|
|
{
|
||
|
|
uint8_t i;
|
||
|
|
for (i = 0; i < 6; i++)
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_PAR + i, mac_addr[i]);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_set_multicast
|
||
|
|
* @brief Set multicast address hash table
|
||
|
|
* @param multicast_addr - 8-byte length multicast address hash table array
|
||
|
|
*/
|
||
|
|
void ch390_set_multicast(uint8_t *multicast_hash)
|
||
|
|
{
|
||
|
|
uint8_t i;
|
||
|
|
for (i = 0; i < 8; i++)
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_MAR + i, multicast_hash[i]);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief reflect an 8bit value.
|
||
|
|
* Only for "ch390_compute_hash_bit"
|
||
|
|
*/
|
||
|
|
static uint8_t reflect_8(uint8_t val)
|
||
|
|
{
|
||
|
|
uint8_t resVal = 0;
|
||
|
|
|
||
|
|
for (int i = 0; i < 8; i++)
|
||
|
|
{
|
||
|
|
if ((val & (1 << i)) != 0)
|
||
|
|
{
|
||
|
|
resVal |= 1 << (7 - i);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
return resVal;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Calculate the corresponding hash bit of the MAC address.
|
||
|
|
* Only for "ch390_set_hash_bit"
|
||
|
|
* @param mac - Destination address
|
||
|
|
* @return Hash bit number
|
||
|
|
*/
|
||
|
|
static uint8_t ch390_compute_hash_bit(uint8_t *mac)
|
||
|
|
{
|
||
|
|
const uint32_t poly = 0x4C11DB7;
|
||
|
|
uint32_t crc = 0xffffffff;
|
||
|
|
|
||
|
|
int byte_i = 0;
|
||
|
|
for(byte_i = 0; byte_i < 6; byte_i++)
|
||
|
|
{
|
||
|
|
uint8_t cur_byte = reflect_8(mac[byte_i]);
|
||
|
|
crc ^= cur_byte << 24;
|
||
|
|
for (int i = 0; i < 8; i++)
|
||
|
|
{
|
||
|
|
if ((crc & 0x80000000) != 0)
|
||
|
|
{
|
||
|
|
crc = (crc << 1) ^ poly;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
crc <<= 1;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
return (crc ^ 0xffffffff) >> 26;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set MAR bit for a particular MAC address
|
||
|
|
* @param mac - Destination address
|
||
|
|
*/
|
||
|
|
void ch390_set_hash_bit(uint8_t *mac)
|
||
|
|
{
|
||
|
|
uint8_t bit = ch390_compute_hash_bit(mac);
|
||
|
|
uint8_t mar = CH390_MAR + bit / 8;
|
||
|
|
|
||
|
|
uint8_t mar_val = ch390_read_reg(mar);
|
||
|
|
mar_val |= 1 << (bit % 8);
|
||
|
|
ch390_write_reg(mar, mar_val);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_mac
|
||
|
|
* @brief Get mac address
|
||
|
|
* @param mac_addr - 6-byte length mac address output
|
||
|
|
*/
|
||
|
|
void ch390_get_mac(uint8_t *mac_addr)
|
||
|
|
{
|
||
|
|
uint8_t i;
|
||
|
|
for (i = 0; i < 6; i++)
|
||
|
|
{
|
||
|
|
mac_addr[i] = ch390_read_reg(CH390_PAR + i);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_multicast
|
||
|
|
* @brief Get multicast address hash table
|
||
|
|
* @param multicast_addr - 8-byte length multicast address hash table output
|
||
|
|
*/
|
||
|
|
void ch390_get_multicast(uint8_t *multicast_hash)
|
||
|
|
{
|
||
|
|
uint8_t i;
|
||
|
|
for (i = 0; i < 8; i++)
|
||
|
|
{
|
||
|
|
multicast_hash[i] = ch390_read_reg(CH390_MAR + i);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_vendor_id
|
||
|
|
* @brief Get vendor ID
|
||
|
|
* @return Vendor ID
|
||
|
|
*/
|
||
|
|
uint16_t ch390_get_vendor_id()
|
||
|
|
{
|
||
|
|
uint16_t id;
|
||
|
|
id = (ch390_read_reg(CH390_VIDL) & 0xff);
|
||
|
|
id |= ch390_read_reg(CH390_VIDH) << 8;
|
||
|
|
return id;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_product_id
|
||
|
|
* @brief Get product ID
|
||
|
|
* @return Product ID
|
||
|
|
*/
|
||
|
|
uint16_t ch390_get_product_id()
|
||
|
|
{
|
||
|
|
uint16_t id;
|
||
|
|
id = (ch390_read_reg(CH390_PIDL) & 0xff);
|
||
|
|
id |= ch390_read_reg(CH390_PIDH) << 8;
|
||
|
|
return id;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_revision
|
||
|
|
* @brief Get chip revision
|
||
|
|
* @return Chip revision
|
||
|
|
*/
|
||
|
|
uint8_t ch390_get_revision()
|
||
|
|
{
|
||
|
|
return ch390_read_reg(CH390_CHIPR);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_interrupt_config
|
||
|
|
* @brief Interrupt configuration
|
||
|
|
* @param mask - Interrupt to be enabled, see "CH390.h" IMR_xxx
|
||
|
|
*/
|
||
|
|
void ch390_interrupt_config(uint8_t mask)
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_IMR, mask);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_rx_enable
|
||
|
|
* @brief Enable or disable packet receive
|
||
|
|
* @param op - 0: disable 1: enable
|
||
|
|
*/
|
||
|
|
void ch390_rx_enable(int op)
|
||
|
|
{
|
||
|
|
uint8_t rcr = ch390_read_reg(CH390_RCR);
|
||
|
|
|
||
|
|
if(op == 0)
|
||
|
|
rcr &= ~RCR_RXEN;
|
||
|
|
else
|
||
|
|
rcr |= RCR_RXEN;
|
||
|
|
|
||
|
|
ch390_write_reg(CH390_RCR, rcr);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_rx_filter_config
|
||
|
|
* @brief Configure receive filter.
|
||
|
|
* @param config - See "CH390.h" RCR_xxx
|
||
|
|
*/
|
||
|
|
void ch390_rx_filter_config(uint8_t config)
|
||
|
|
{
|
||
|
|
uint8_t rcr = ch390_read_reg(CH390_RCR) & RCR_RXEN;
|
||
|
|
ch390_write_reg(CH390_RCR, rcr | config);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_wakeup_config
|
||
|
|
* @brief Enable or disable wakeup_function
|
||
|
|
* @param events - Events that trigger wakeup
|
||
|
|
* WCR_LINKEN - Link status change
|
||
|
|
* WCR_SAMPLEEN - Sample frame
|
||
|
|
* WCR_MAGICEN - Magic packet
|
||
|
|
* 0 - Disable wakeup function
|
||
|
|
*/
|
||
|
|
void ch390_wakeup_config(uint8_t events)
|
||
|
|
{
|
||
|
|
uint8_t ncr = ch390_read_reg(CH390_NCR);
|
||
|
|
if(events)
|
||
|
|
ncr |= NCR_WAKEEN;
|
||
|
|
else {
|
||
|
|
ncr &= ~NCR_WAKEEN;
|
||
|
|
}
|
||
|
|
ch390_write_reg(CH390_NCR, ncr);
|
||
|
|
ch390_write_reg(CH390_WCR, events);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_wake_notify
|
||
|
|
* @brief Wait for Magic Packet or Sample Frame and discard all
|
||
|
|
* other packets.
|
||
|
|
* If the application needs to use Wake On LAN, call this
|
||
|
|
* function every time before MCU enters low power mode.
|
||
|
|
* An external interrupt signal is accessible on WOL pin
|
||
|
|
* when wake up event occurred.
|
||
|
|
*/
|
||
|
|
void ch390_wake_notify()
|
||
|
|
{
|
||
|
|
uint8_t ncr = ch390_read_reg(CH390_NCR);
|
||
|
|
ch390_write_reg(CH390_NCR, ncr ^ 0x10);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_loop_back_enable
|
||
|
|
* @brief Enable loop back mode
|
||
|
|
* @param op - 0: disable 1: enable
|
||
|
|
*/
|
||
|
|
void ch390_loop_back_enable(int op)
|
||
|
|
{
|
||
|
|
uint8_t ncr = ch390_read_reg(CH390_NCR) & ~0x06;
|
||
|
|
|
||
|
|
if(op == 1) ncr |= NCR_LBK_MAC;
|
||
|
|
|
||
|
|
ch390_write_reg(CH390_NCR, ncr);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_duplex_mode
|
||
|
|
* @brief Get current duplex mode of the internal PHY
|
||
|
|
* @return 0: Half-duplex 1: Full-duplex
|
||
|
|
*/
|
||
|
|
int ch390_get_duplex_mode()
|
||
|
|
{
|
||
|
|
return !!(ch390_read_reg(CH390_NCR) & NCR_FDX);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_phy_speed
|
||
|
|
* @brief Get the speed of the internal PHY.
|
||
|
|
* Only valid after PHY linked
|
||
|
|
* @return 0: 100Mbps 1: 10Mbps
|
||
|
|
*/
|
||
|
|
int ch390_get_phy_speed()
|
||
|
|
{
|
||
|
|
return !!(ch390_read_reg(CH390_NSR) & NSR_SPEED);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_link_status
|
||
|
|
* @brief Get link status of the internal PHY
|
||
|
|
* @return 0: Link failed 1: Link OK
|
||
|
|
*/
|
||
|
|
int ch390_get_link_status()
|
||
|
|
{
|
||
|
|
uint8_t nsr = ch390_read_reg(CH390_NSR);
|
||
|
|
return !!(nsr & NSR_LINKST);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_sleep_control
|
||
|
|
* @brief Enter or exit sleep mode
|
||
|
|
* @param op - 0: Power up 1: Power down
|
||
|
|
*/
|
||
|
|
void ch390_sleep_control(int op)
|
||
|
|
{
|
||
|
|
if(op)
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_SCCR, 0x01);
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
ch390_read_reg(CH390_RSCCR);
|
||
|
|
ch390_if.delay_us(100);
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
#ifndef CH390_INTERFACE_16_BIT
|
||
|
|
/**
|
||
|
|
* @name ch390_gpio_config
|
||
|
|
* @brief Config the input/output direction of GPIO1~3
|
||
|
|
* In 8-bit mode, GPIO4~6 are output only
|
||
|
|
* @param GPIOx - CH390_GPIO1 ~ CH390_GPIO3
|
||
|
|
* dir - 0: Input 1: Output
|
||
|
|
*/
|
||
|
|
void ch390_gpio_config(uint8_t GPIOx, uint8_t dir)
|
||
|
|
{
|
||
|
|
uint8_t gpcr = ch390_read_reg(CH390_GPCR);
|
||
|
|
if(dir)
|
||
|
|
{
|
||
|
|
gpcr |= GPIOx;
|
||
|
|
}
|
||
|
|
else {
|
||
|
|
gpcr &= ~GPIOx;
|
||
|
|
}
|
||
|
|
ch390_write_reg(CH390_GPCR, gpcr);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_gpio_write_bit
|
||
|
|
* @brief Sets or clears the selected gpio bit.
|
||
|
|
* In SPI mode, only GPIO1~3 are available
|
||
|
|
* @param GPIOx - CH390_GPIO1 ~ CH390_GPIO6
|
||
|
|
* level - 0: Clear pin 1: Set pin
|
||
|
|
*/
|
||
|
|
void ch390_gpio_write_bit(uint8_t GPIOx, uint8_t level)
|
||
|
|
{
|
||
|
|
uint8_t gpr = ch390_read_reg(CH390_GPR);
|
||
|
|
if(level)
|
||
|
|
{
|
||
|
|
gpr |= GPIOx;
|
||
|
|
}
|
||
|
|
else {
|
||
|
|
gpr &= ~GPIOx;
|
||
|
|
}
|
||
|
|
ch390_write_reg(CH390_GPR, gpr);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_gpio_read_bit
|
||
|
|
* @brief Read gpio input, only CH390_GPIO1 ~ 3 are available
|
||
|
|
* @param GPIOx - CH390_GPIO1 ~ CH390_GPIO3
|
||
|
|
* @return Input pin value
|
||
|
|
*/
|
||
|
|
uint8_t ch390_gpio_read_bit(uint8_t GPIOx)
|
||
|
|
{
|
||
|
|
uint8_t gpr = ch390_read_reg(CH390_GPR);
|
||
|
|
return !!(gpr & GPIOx);
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_int_pin_config
|
||
|
|
* @brief Configure INT pin output type and polarity
|
||
|
|
* @param type - INCR_TYPE_OD: Open drain output
|
||
|
|
* INCR_TYPE_PP: Push pull output
|
||
|
|
* pol - INCR_POL_L: Active low
|
||
|
|
* INCR_POL_H: Active high
|
||
|
|
*/
|
||
|
|
void ch390_int_pin_config(uint8_t type, uint8_t pol)
|
||
|
|
{
|
||
|
|
ch390_write_reg(CH390_INTCR, type | pol);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @name ch390_get_int_status
|
||
|
|
* @brief Get CH390 interrupt status and clear them
|
||
|
|
* @return Interrupt status
|
||
|
|
*/
|
||
|
|
uint8_t ch390_get_int_status()
|
||
|
|
{
|
||
|
|
uint8_t int_status = ch390_read_reg(CH390_ISR);
|
||
|
|
// Clear interrupt status by write 1
|
||
|
|
ch390_write_reg(CH390_ISR, int_status);
|
||
|
|
return int_status;
|
||
|
|
}
|