# item

module_name: UNILOG_PS_DAIL
name: psDialStartUpPlmnConfig_2
string:
AT DAIL, start up procedure, no PLMN config found for current IMSI, use the default ATTBEAR parameters


module_name: UNILOG_CERRC
name: CerrcUpdateFreqBarredByBestRank_intra
string:
Intra-freq barredByBestRank due to highest ranked intra-CELL(%d): barredByPlmn(%d), barredByTa(%d) \n


module_name: UNILOG_CERRC
name: CerrcUpdateFreqBarredByBestRank_inter
string:
Inter-freq(%d) barredByBestRank due to highest ranked inter-CELL(%d): barredByPlmn(%d), barredByTa(%d) \n


module_name: UNILOG_CERRC
name: CerrcUpdateIntraInterMeasThreshold_end
string:
CerrcUpdateIntraInterMeasThreshold: Intra-Threshold(%d), Inter-Threshold(%d), sIntraSearchP(%d), sNonIntraSearchP(%d) \n


module_name: UNILOG_CERRC
name: CerrcIsAccessAllowedNB_AC
string:
CerrcIsAccessAllowedNB: PLMN(%x-%x), plmnType(%d), USIM(AC15~AC0) accessClass(0x%x), abConfigPresent(%d) 


module_name: UNILOG_CAC_DEV
name: CacDevGetCiotBandCapaCnf_1
string:
CAC DEV, no 'CMI_DEV_GET_CIOT_BAND_CAPA_REQ' pending, \when process the GET CIOT BAND CAPA CONF from CCM REG


module_name: UNILOG_CAC_MM
name: CacMmCregInfoChangeInd_2
string:
CAC MM, CREG only need to report REG status, but only location info changes, don't need to report CREG


module_name: UNILOG_CAC_MM
name: CacMmRegProcedureCnf_1
string:
CAC MM, no 'CMI_MM_SET_AUTO_PLMN_REQ/CMI_MM_MANUAL_PLMN_SELECT_REQ' pending, \when process the REG CNF from CCM REG


module_name: UNILOG_CAC_MM
name: CacMmManualPlmnSearchCnf_1
string:
CAC MM, no 'CMI_MM_MANUAL_PLMN_SEARCH_REQ' pending, when process the MANUAL PLMN SEARCH CNF from CCM REG


module_name: UNILOG_CAC_MM
name: CacMmCemmCacGetEdrxParmCnf_1
string:
CAC MM, no 'CMI_MM_GET_REQUESTED_PSM_PARM_REQ/CMI_MM_READ_EDRX_DYN_PARM_REQ' pending, \when process the GET EDRX REQUEST PARM CNF


module_name: UNILOG_CAC_PS
name: CacPsCeregInfoChangeInd_2
string:
CAC PS, CEREG only need to report REG status, but only location info changes, don't need to report CEREG


module_name: UNILOG_CAC_SIM
name: CacSimCmiSimRestrictedAccessCnfFunc_1
string:
No 'CMI_SIM_RESTRICTED_ACCESS_REQ' pending, when process the CCM_SIM_RESTRICTED_ACCESS_CNF from CCM SIM.


module_name: UNILOG_CAC_SIM
name: CacSimCmiUsatWriteTerminalProfileCnfFunc_1
string:
No 'CMI_SIM_GET_TERMINAL_PROFILE_REQ' pending, when process the CMI_SIM_GET_TERMINAL_PROFILE_CNF from CCM SIM.


module_name: UNILOG_CCM_REG
name: CcmRegManualPlmnSelectReq_1
string:
CCM REG, SIM is not ready: %d, or CFUN is not power on : %d, just pass MANUAL PLMN selection tp CEMM


module_name: UNILOG_CEMM
name: CemmProcPlmnSearchDoneMsg_1
string:
Before rcv plmn srch cnf, Detach Req has already sent, Ue should still kept in EMM_DEREGISTERED_INITIATED


module_name: UNILOG_CEMM
name: EmmProcT3245RemainLen_1
string:
EmmProcT3245RemainLen: t3245 running state is %d, startSecond is %d, totalSecond is %d, currSecond is %d


module_name: UNILOG_NAS_PLMN
name: CePlmnIsEplmnStatic_2
string:
CE PLMN, DEST PLMN: (0x%x,0x%x) has low priority than SRC PLMN: (0x%x,0x%x), although they are EHPLMN, but for GCF TEST, we return FALSE here


module_name: UNILOG_NAS_PLMN
name: CemmPlmnCurPlmnSearchDone_7
string:
PLMN, period high PLMN search done, \selectedPlmn: 0x%x, 0x%x, check whether need to start period T timer


module_name: UNILOG_NAS_PLMN
name: CemmPlmnManualPlmnSearchReq_1
string:
PLMN, current PLMN search (%d) is ongoing, and still a PLMN search pending (%d), reject this MANUAL PLMN search request


module_name: UNILOG_NAS_PLMN
name: CemmPlmnManualPlmnSearchReq_3
string:
PLMN, current MANUAL PLMN search is ongoing (%d), \but another MANUAL PLMN search comes, reject, and abort current procedure


module_name: UNILOG_NAS_PLMN
name: CemmPlmnManualPlmnSearchReq_4
string:
PLMN, current High priority PLMN search is ongoing (%d), \and still a PLMN search pending (%d), reject this MANUAL PLMN search request


module_name: UNILOG_NAS_PLMN
name: CemmPlmnManualPlmnSelectReq_1
string:
Manual PLMN selection (%d), request PLMN: (0x%x, 0x%x), \but another PLMN search (%d) is ongoing now


module_name: UNILOG_NAS_PLMN
name: CemmPlmnManualPlmnSelectReq_6
string:
PLMN, start manual PLMN selection, \but current AS is not in IDLE state (%d), force to do IDLE firstly


module_name: UNILOG_NAS_PLMN
name: CemmPlmnPeriodHighPlmnSearchReq_1
string:
PLMN, while trigger period high plmn search, \another plmn is ongoing, type: %d, status: %d, just pending it


module_name: UNILOG_NAS_PLMN
name: CemmPlmnPeriodHighPlmnSearchReq_2
string:
PLMN, while trigger period high plmn search, \another plmn is also pending, type: %d, just discard it


module_name: UNILOG_NAS_PLMN
name: CemmPlmnPeriodHighPlmnTimerExpiry_1
string:
PLMN, period PLMN timer expiry, but timer state is not started, \maybe this timer already stopped before


module_name: UNILOG_NAS_PLMN
name: CePlmnProcCerrcPlmnSearchIndSig_1
string:
PLMN, Current PLMN search type: %d, and already aborted, \but still received CerrcPlmnSearchInd, ignore it


module_name: UNILOG_NAS_PLMN
name: CemmPlmnProcCerrcPlmnSearchCnfSig_1
string:
PLMN, PLMN search type: %d, aready aborted, \but still received CerrcPlmnSearchCnf, need to wait for CerrcAbortPlmnSearchCnf


module_name: UNILOG_NAS_PLMN
name: CemmPlmnProcCerrcPlmnSearchCnfSig_2
string:
PLMN, PLMN select type: %d, suitable PLMN already selected in CerrcPlmnSearchInd, \PLMN search procedure done


module_name: UNILOG_CESM
name: CesmProcActEpsBearerCtxReq_1
string:
CesmProcActEpsBearerCtxReq: simcfg NSPLI: %d,simcfg override NSLPI: %d,ctx->NSLPI: %d,gCesmNasNotLowProprityFlag: %d


module_name: UNILOG_PS
name: PsNvmRead_3
string:
PS NVM, file ID: %d, can't read the file header, or filer header not right: %d, try to use the defult value


module_name: UNILOG_PS
name: PsNvmRead_6
string:
PS NVM, file ID: %d, file version is latest, but file size not right: (%d)/(%d), try to use the defult value


module_name: UNILOG_RLC
name: CeRlcAssembleLcDlSdu_1
string:
RLC AM LC: %d, don't has valid PDCP PDU, maybe only RLC STATUS report, or RLC PDU has been discarded.


module_name: UNILOG_RLC
name: CeRlcAmDecodeSegPduDataPart_1
string:
CE RLC, AM DL, this RLC SEG data partly reported to PDCP, and new SEG data all received before, parseSoEnd: %d, oldSoEnd: %d


module_name: UNILOG_RLC
name: CeRlcAmDecodeSegPduDataPart_3
string:
CE RLC, AM DL, new RLC SEG PDU: soStart(%d) ~ soEnd(%d), all insert before OLD SEG: soStart(%d) ~ soEnd(%d)


module_name: UNILOG_RLC
name: CeRlcAmDecodeSegPduDataPart_4
string:
CE RLC, AM DL, new RECV SEG, soStart: %d - soEnd: %d, already RECV before, OLD SoStart: %d - soEnd: %d


module_name: UNILOG_RLC
name: CeRlcAmAssembleLcDlSdu_CTCASE_2
string:
AM LC: %d, VRH(%d) == VRR(%d)+1, current is SEG PDU, and SN(%d) == VRR, don't trigger the status report


module_name: UNILOG_RLC
name: CeRlcAmUlAssembleStatusPdu_5
string:
AM UL, not enought grant: %d, for LC: %d Status PDU, NACK_SN: %d, \soStart: %d, Soend: %d, bitOffset: %d


module_name: UNILOG_RLC
name: CeRlcAmUlAssembleStatusPdu_7
string:
AM UL, not enought STATUS PDU buffer size: 50, for LC: %d Status PDU, NACK_SN: %d, soStart: %d, Soend: %d, bitOffset: %d


module_name: UNILOG_RLC
name: CeRlcAmUlAssembleStatusPdu_9
string:
AM UL, not enought grant: %d, for LC: %d Status PDU, NACK_SN: %d, soStart: %d, Soend: %d, bitOffset: %d


module_name: UNILOG_RLC
name: CeRlcAmUlAssembleStatusPdu_13
string:
AM UL, LC: %d, not enough grant to send STATUS PDU, grant left: %d, need to continue to send STATUS PDU in next grant


module_name: UNILOG_DR
name: CedrProcDrTestLoopModeADataReq_2
string:
TEST LOOP MODE A, EPSID: %d, is CP ONLY (%d), or DRB not exist (%d), or suspended (%d), free loopback data


module_name: UNILOG_DR
name: CedrProcDrTestLoopModeBDataReq_2
string:
TEST LOOP MODE B, EPSID: %d, is CP ONLY (%d), or DRB not exist (%d), or suspended (%d), free loopback data


module_name: UNILOG_DR
name: CedrTestLoopModeBTDelayExpiry_1
string:
TEST LOOP MODE B, Delay timer expiry, EPSID: %d, is CP ONLY (%d), or DRB not exist (%d), or suspended (%d), free loopback data


module_name: UNILOG_DR
name: CedrProcDrPsDataPlaneTransReqSig_2
string:
CEDR, transfer to UP, but bearerSuspend: %d/rabReestSent: %d/rabReestPending: %d, pending the request


module_name: UNILOG_DR
name: CedrUlPkgListDataReq_3
string:
EpsId: %d, via CP, but bearer suspend: %d, or rabReestSent: %d, rabReestPending: %d, just FWD UL data to CEDR


module_name: UNILOG_DR
name: CedrUlPkgListDataReq_5
string:
EpsId: %d, via CP, but bearer suspend: %d, or rabReestSent: %d, rabReestPending: %d, just FWD One UL data to CEDR


module_name: UNILOG_TCPIP_LWIP
name: lwip_gethostbyname_2
string:
lwip_gethostbyname hostent.h_name,hostent.h_aliases(0x%x),hostent.h_addrtype(%d),hostent.h_length(%d),hostent.h_addr_list(0x%x)


module_name: UNILOG_PSIF
name: PsifUlRohcOutput_5
string:
CID: %d, ROHC compress PKG, RAW PKG len: %d, compressed offset: %d, payload size: %d, compressed header size: %d


module_name: UNILOG_PSIF
name: PsifTcpIpRohcDecompOnePkg_3
string:
ROHC decomp SUCC, decomp header len:  %u, pkg payload offset: %u, pkg payload len: %u, feedback len: %u


module_name: UNILOG_ROHC
name: c_ip_code_ir_remainder_1
string:
ROHC packet too small (%u bytes max) for the 2-byte SN in the IR remainder at %u bytes of the beginning of the packet


module_name: UNILOG_ROHC
name: c_rtp_decide_FO_packet_4
string:
choose packet UOR-2-RTP because at least one static field changed and less than 14 SN bits must be transmitted


module_name: UNILOG_ROHC
name: c_rtp_decide_SO_packet_1
string:
nr_ip_bits = %d, is_ts_deducible = %d,is_ts_scaled = %d, Marker bit = %d, nr_of_ip_hdr = %d,rnd = %d


module_name: UNILOG_ROHC
name: c_rtp_decide_SO_packet_6
string:
choose packet UO-1-RTP because neither of the %d IP header(s) are 'IPv4 with non-random IP-ID less than 4 SN bits must be transmitted, and %u <= 6 TS bits 


module_name: UNILOG_ROHC
name: c_rtp_decide_SO_packet_7
string:
choose packet UO-1-ID because only one of the %d IP header(s) is IPv4 with non-random IP-ID with %d <= 5 IP-ID bits to transmit


module_name: UNILOG_ROHC
name: c_rtp_decide_SO_packet_8
string:
choose packet UO-1-TS because neither of the %d IP header(s) is IPv4 with non-random IP-ID and %u <= 6 TS bits must be transmitted


module_name: UNILOG_ROHC
name: rohc_comp_tcp_are_options_acceptable_8
string:
malformed TCP option %u: unexpected length for SACK Permitted option: %u found in packet while %u expected


module_name: UNILOG_ROHC
name: rohc_comp_tcp_are_options_acceptable_9
string:
malformed TCP option %u: unexpected length for SACK option: %u found in packet while 2 + [1-4] %u expected


module_name: UNILOG_ROHC
name: rohc_comp_tcp_are_options_acceptable_10
string:
malformed TCP option %u: unexpected length for TS option: %u found in packet while 2 + [1-4] %u expected


module_name: UNILOG_ROHC
name: tcp_detect_options_changes_2
string:
unexpected TCP header: too many TCP options: %u options found in packet but only %u options possible


module_name: UNILOG_ROHC
name: rohc_comp_pad_4
string:
%u byte ROHC packet cannot be padded up to %u bytes with %u bytes: only %u bytes available in buffer before ROHC data


module_name: UNILOG_ROHC
name: rohc_comp_set_mrru_2
string:
failed to set MRRU to %u bytes: segmentation is not compatible with ROHCv2 profile %u that is enabled


module_name: UNILOG_ROHC
name: rohc_comp_find_ctxt_5
string:
Context Replication in action (%u/%u packets sent): check for CID %u whether base context with CID %u changed too much


module_name: UNILOG_ROHC
name: rohc_comp_feedback_parse_opts_6
string:
malformed FEEDBACK-2: duplicate CRC option %u specifies a CRC value %u instead of CRC %u specified in the first CRC option


module_name: UNILOG_ROHC
name: rohc_comp_feedback_check_opts_2
string:
malformed FEEDBACK-2: option (%u) is specified %u times while compression profile (%d) allows only %u times


module_name: UNILOG_ROHC
name: detect_ipv6_ext_changes_3
string:
send some bits for extension header list of the outer IPv6 header because it was not sent enough times %u


module_name: UNILOG_ROHC
name: detect_ipv6_ext_changes_4
string:
send some bits for extension header list of the outer IPv6 header because some of its items were not sent enough times %u


module_name: UNILOG_ROHC
name: rohc_list_update_context_1
string:
replace the reference list (gen_id = %u) by current list (gen_id = %u) because it was transmitted at least L = %u times


module_name: UNILOG_ROHC
name: rohc_list_update_context_2
string:
use the current list (gen_id = %u) as the first reference list because it was transmitted at least L = %u times


module_name: UNILOG_ROHC
name: rohc_list_get_nearest_list_10
string:
the anonymous list is going to be transmitted for the %u time, promote it to an identified list with gen_id = %u


module_name: UNILOG_ROHC
name: rohc_list_decide_type_3
string:
use list encoding type 0 because the structure of the list did not change (items may be sent if they changed)


module_name: UNILOG_ROHC
name: rohc_comp_ipv6_exts_are_acceptable_4
string:
malformed IPv6 header: the Hop-By-Hop extension header should be the very first extension header, not the %u one


module_name: UNILOG_ROHC
name: rohc_comp_ipv6_exts_are_acceptable_9
string:
malformed IPv6 header: the Destination extension header should occur at most twice, but it was found %u times


module_name: UNILOG_ROHC
name: rohc_comp_ipv6_exts_are_acceptable_10
string:
malformed IPv6 header: the extension header of type %u header should occur at most once, but it was found %u times


module_name: UNILOG_ROHC
name: c_tcp_ts_lsb_code_1
string:
ROHC buffer too short for encoding the TCP TS option: %u byte required but only %u byte(s) available


module_name: UNILOG_ROHC
name: tcp_parse_dynamic_tcp_1
string:
only %u bytes available while at least %u bytes required for mandatory fields of the TCP dynamic part


module_name: UNILOG_ROHC
name: d_tcp_parse_sack_list_item_2
string:
malformed ROHC packet: malformed TCP option items: encoding with no SACK block is only allowed in the irregular chain


module_name: UNILOG_ROHC
name: tcp_parse_replicate_tcp_11
string:
 only %u bytes available while at least %u bytes required for ecn_padding + tcp_res_flags + tcp_ecn_flags


module_name: UNILOG_ROHC
name: rohc_decomp_feedback_ack_5
string:
should send a positive ACK now (CID = %u, current mode = %d,target mode = %d, at least %u bits of SN %d, rate-limiting  %u of 3200 with threshold %u)


module_name: UNILOG_ROHC
name: rohc_decomp_feedback_nack_1
string:
do not perform downward state transition nor send negative feedback to compressor since CID was not identified


module_name: UNILOG_ROHC
name: rohc_decomp_feedback_nack_12
string:
should send a negative ACK (CID = %u, NACK type = %d, current mode = %d, target mode = %d, at least %zu bits of SN %u, rate-limiting = %u of 3200 with threshold %u and %u of 3200 with threshold %u)


module_name: UNILOG_ROHC
name: rohc_decomp_feedback_nack_18
string:
perform a downward state transition now (CID = %u, NACK type = %d, current mode = %d, target mode = %d, rate-limiting = %u of 3200 with threshold %u and %u of 3200 with threshold %u)


module_name: UNILOG_ROHC
name: rohc_decomp_set_mrru_2
string:
failed to set MRRU to %u bytes: segmentation is not compatible with ROHCv2 profile %d that is enabled


module_name: UNILOG_ROHC
name: rohc_decomp_parse_feedback_4
string:
failed to store %zu-byte feedback into the buffer given by the user, only %zu bytes still available: ignore feedback


