/* * lfs util functions * * Copyright (c) 2017, Arm Limited. All rights reserved. * SPDX-License-Identifier: BSD-3-Clause */ #include "lfs_util.h" #include "plat_config.h" #ifdef FEATURE_BOOTLOADER_PROJECT_ENABLE #include "common.h" #else #include DEBUG_LOG_HEADER_FILE #endif // Only compile if user does not provide custom config #ifndef LFS_CONFIG #if defined CHIP_EC618 || defined CHIP_EC618_Z0 uint8_t BSP_QSPI_SWReset(void); uint8_t BSP_QSPI_XIP_Mode_Disable(void); uint8_t BSP_QSPI_XIP_Mode_Enable(void); #else extern void FLASH_clrStatus( void ); #endif AP_PLAT_COMMON_BSS static uint32_t gLFSAssertFlag = 0; // Software CRC implementation with small lookup table uint32_t lfs_crc(uint32_t crc, const void *buffer, size_t size) { static uint32_t rtable[16] = { 0x00000000, 0x1db71064, 0x3b6e20c8, 0x26d930ac, 0x76dc4190, 0x6b6b51f4, 0x4db26158, 0x5005713c, 0xedb88320, 0xf00f9344, 0xd6d6a3e8, 0xcb61b38c, 0x9b64c2b0, 0x86d3d2d4, 0xa00ae278, 0xbdbdf21c, }; #if 0 const uint8_t *data = buffer; for (size_t i = 0; i < size; i++) { crc = (crc >> 4) ^ rtable[(crc ^ (data[i] >> 0)) & 0xf]; crc = (crc >> 4) ^ rtable[(crc ^ (data[i] >> 4)) & 0xf]; } #else uint32_t *data_32 = (uint32_t*)buffer; for(size_t i = 0; i < (size >> 2); i++, data_32++) { uint32_t aWord = *data_32; for(size_t j = 0; j < 4; j++) { crc = (crc >> 4) ^ rtable[(crc ^ ((aWord & 0xff) >> 0)) & 0xf]; crc = (crc >> 4) ^ rtable[(crc ^ ((aWord & 0xff) >> 4)) & 0xf]; aWord >>= 8; } } const uint8_t* data_8 = (uint8_t*)data_32; for (size_t i = 0; i < (size & 0x3); i++) { crc = (crc >> 4) ^ rtable[(crc ^ (data_8[i] >> 0)) & 0xf]; crc = (crc >> 4) ^ rtable[(crc ^ (data_8[i] >> 4)) & 0xf]; } #endif return crc; } void lfs_setAssertFlag(uint32_t flag) { gLFSAssertFlag |= flag; } #ifndef LFS_NO_ASSERT void lfs_assert(bool test) { if(test == 0) { // shall be atomic op below __disable_irq(); if (gLFSAssertFlag & EC_FS_ASSERT_FLASH_RESET_FLAG) { #if defined CHIP_EC618 || defined CHIP_EC618_Z0 BSP_QSPI_XIP_Mode_Disable(); BSP_QSPI_SWReset(); BSP_QSPI_XIP_Mode_Enable(); #else FLASH_clrStatus(); #endif } uint32_t excepFsAssertCount = BSP_GetFSAssertCount(); BSP_SetFSAssertCount(++excepFsAssertCount); ECPLAT_PRINTF(UNILOG_LFS, lfs_assert_0, P_ERROR, "lfs assert count:%d", excepFsAssertCount); if(excepFsAssertCount && ((excepFsAssertCount % EC_FS_ASSERT_REFORMAT_THRESHOLD) == 0)) { ECPLAT_PRINTF(UNILOG_LFS, lfs_assert_1, P_ERROR, "!!!File System and Plat config will be clear!!!"); } EC_ASSERT(0, 0, 0, 0); } } #endif/*LFS_NO_ASSERT*/ #endif